Free UK Next Day Shipping over £60.
Europe over 70€.
  1. HMS Bruce Steel FG
Back to top

HMS Bruce Steel FG

72006_000_0060
(6)
$21.70

The Edelrid HMS Bruce Steel FG is a belay biner which has been made from steel rather than aluminium to almost completely eliminate the wear associated with belay devices. There is a gate for your harness belay loop to keep the biner in the correct orientation. It is the perfect fit and is highly recommended for use with the Edelrid Mega Jul.

Details:

  • The HMS Bruce Steel FG is designed to perfectly complement the Mega Jul’s geometry

  • Spring bar holds carabiner in place when belaying to prevent cross loading

  • Keylock closure system for optimal handling when clipping and unclipping

  • H-profile construction ensures best possible use of material and minimal weight

Technical Specifications

  • Fmax. major axis [Kn]: 28

  • Fmax. open [kN]: 10

  • Fmax. minor axis [kN]: 8

  • Width [mm]: 72,00

  • Length [mm]: 107,00

  • Gate opening [mm]: 22

  • CE marking: CE 0123

  • Closure: Screw

  • Weight: 140 g

10+ in stock

The Edelrid HMS Bruce Steel FG is a belay biner which has been made from steel rather than aluminium to almost completely eliminate the wear associated with belay devices. There is a gate for your harness belay loop to keep the biner in the correct orientation. It is the perfect fit and is highly recommended for use with the Edelrid Mega Jul.

Details:

  • The HMS Bruce Steel FG is designed to perfectly complement the Mega Jul’s geometry

  • Spring bar holds carabiner in place when belaying to prevent cross loading

  • Keylock closure system for optimal handling when clipping and unclipping

  • H-profile construction ensures best possible use of material and minimal weight

Technical Specifications

  • Fmax. major axis [Kn]: 28

  • Fmax. open [kN]: 10

  • Fmax. minor axis [kN]: 8

  • Width [mm]: 72,00

  • Length [mm]: 107,00

  • Gate opening [mm]: 22

  • CE marking: CE 0123

  • Closure: Screw

  • Weight: 140 g

Got a question about this product?

If you have a question about this product, or would like any technical advice don't hesitate to post a question using the link below and one of our team of gear experts will reply as soon as possible.

Post a question here

Reviews & ratings

Average rating

Based on 6 ratings
4.5

Product reviews (2)

Dan Verge
Dan Verge
Jul 15, 2017

I bought this to replace a worn aluminium screwgate which wore 1/3 through in about 12 years so I'm guessing this one will probably last as long as me! Several months of use have barely taken the casting marks off yet so I've no doubts about its longevity.
It's a really nice piece of kit, the screwgate action is very smooth and positive, the aligning gate is a neat addition and not obtrusive or fiddly to use.
I only sport climb so this gets left at the bottom of the route when i'm climbing which means the weight isn't an issue for me, it is a chunky old piece of gear! If you are loading up for a multipitch epic then it might not be ideal but for a sport or indoor climber it's a piece of kit you can buy and forget about, probably for life.

Jeremy Rodgers
Jeremy Rodgers
Mar 01, 2017

Goes perfectly with the Mega Jul 2 belay device. A bit expensive but it is durable, and it depends how much you like your Mega Jul...

Back to top